Pickleball Pallet with Buttcap (XL)
Print Profile(2)
Description
This is a pickleball pallet and buttcap that will enlarge the handle diameter of your paddle. It is designed with a square-ish aspect ratio for those who don't care for the traditionally more rectangular shape.
For the pallet, I print with 6% infill using the cross hatch pattern in the slicer. This yields a ~5g pallet that is strong and firm. This setting is embedded in the Bambu Studio project. For the buttcap, I print with 100% infill.
NOTE: The pallets are intentionally shorter than the paddle handle. The buttcap has an internal sleeve that will slide over the end of the exposed handle. See page 2 in the attached Assembly Guide (which comes from a different project). Just note there are no side shims for this kit.
PETG, or PETG-CF filaments recommended. The latter is preferred.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)