Seatrout lure line through - Free 3D Print Model

Search models, users, collections, and posts

Swe_Tonga

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(4)

All

P2S

H2D

P1S

X1 Carbon

H2S

H2C

P1P

A1 mini

X1E

H2D Pro

X2D

A2L

10gram weight, 1,6mm hole for the line. PLASILK 30mm/s

Designer

1.4 h

1 plate

5.0(3)

7gram weight, 1,3mm hole for the line.

Designer

1.5 h

1 plate

5.0(1)

10gram weight, 1,3mm hole for the line.

Designer

1.4 h

1 plate

10gram weight, 1,6mm hole for the line.

Designer

1.4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Sea trout lure with added dropshot weight.

The paus is already there if you print from bambu handy app or Bambu studio. If you are using anything else im not sure..(new to 3d printing)

for the 7gram weight pause the print at 376.. dropshotweight size 6*6*26,30mm

for the 10gram weightpause the print at 325.. dropshotweight size 6,50*6,50*30mm

this is a minor update from my previous model.

the eyes have a flat surface for easier glueing eyes.

i printed mine with 1,3mm hole for the line, and that works great for me. but i added a profile with 1,6mm if you find the hole to think for your line.

not all printers have the same tolerance. and shrinking could also affect.

the pla silk profile just slows down outer walls to 30mm/s for a glossier look

Not sure of why i added the stl file as well.

but if u use it. 100% infill, add a negative cylinder, size of your choice, slice it and make sure your cylinder fits inside the lure.

Weights I use from temu.

https://share.temu.com/G1GLl5LDP8B

Comment & Rating (26)

@Lakritzfisch

the print went well! the pause to insert the weight also worked well. I only had to shorten my lead a bit. however, I couldn't pull the string through at the end. it might have slipped a little when inserting the lead. maybe you can insert a kind of funnel on both sides of the cut to compensate for inaccuracies. I will try it out soon (I'm still quite new). I like the surface of the standing print better than the lying one

The designer has replied

Show original

@user_1395628040

I had one lure out of almost 20-25 where i couldnt insert my line all the way. could be if the lure has moved slightly when insterting the dropshot weight. or it could be that the printer has to be really fine tuned. if you want i can make that hole 0,2-0,3 mm larger and upload as a second profile. its 1,3mm at the moment, then when printing i guess it shrink a bit, and not all printers are the same use a plier just above the weight and crack the lure if u want to use it for the next time.

@user_1395628040

maybe 1,6 for the second profile?

@user_1395628040

Replying to @user_1395628040 :

i use 0.35mm flourocarbon when fishing

@user_1395628040

first fish with the 7cm version. silk silver

@user_1395628040

these are the colors I printed so far😊

@Denofu

Has it got any action?

The designer has replied

@user_1395628040

not yet, only tried them once. but had a follower. sea trout season here is 1 of April. I'm sure they will catch 🐠 😊

@user_1395628040

sorry, you might mean how it goes in the water? it actually swims nicely in the water. rocks you forward side to side. I will try to upload a gif of how it swims

Show original

@Denofu

Replying to @user_1395628040 :

A bit of both 😁 Would love to see how it swims, especially how it falls on a stop. About the dropshot weight, is it lead? My local stores only sell zinc dropshots :/

@Lakritzfisch

Print Profile

10gram weight, 1,6mm hole for the line. PLASILK 30mm/s

Everything went well! The surface is good, except for a few small spots from the supports. but that doesn't bother me or the fish. Thanks for the adjustment!

The profile uploader has replied

Show original

@user_1395628040

I'm sure the fish won't care😊 I really hope you catch something really big with it👍😊

@lipoly

Print Profile

10gram weight, 1,6mm hole for the line. PLASILK 30mm/s

The profile uploader has replied

@user_1395628040

👍

@user_1395628040

Thanks for the rating, you should try the 7cm version. my personal favorite. sinks faster.

@Niko1St

Print Profile

10gram weight, 1,6mm hole for the line. PLASILK 30mm/s

The profile uploader has replied

@user_1395628040

Thanks for the rating, you should try the 7cm version. my personal favorite. sinks faster.

@user_1395628040

om sure petg would have been a better option. but not that many fun colors so im sticking to pla. can print new ones when they break 😊

@red_tag

i think petg is considerably better :)

Show original

@odis64

Print Profile

7gram weight, 1,3mm hole for the line.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.