VW Golf Jetta Scirocco Polo mirror adjustment knob

I've designed an alternative mirror adjustment knob for some old models of Volkswagen, complete with the VW logo.

Reference number: 191 857 520 A 01C

Golf 1 8.78- 8.83
Golf 1 Cabrio 1.79- 7.92
Golf Caddy 10.82- 7.92
Golf 2 8.83- 7.92

Scirocco 1979-1992
Jetta 1 8.80-12.83
Jetta 2 12.83- 7.92

Polo 1 and 2 1982-1994

Colors with and without AMS

There are two different versions: one for use with an AMS and one for use without one.

If you want two colors but don't have an AMS, use the "without AMS" version. The logo is redesigned so that the VW logo is raised. You can only add a pause before the second-to-last layer in your slicer. Then, during this pause, you can use a filament of a different color.

The original VW knob is made of a slightly softer material than the Bambu Lab PETG HF, which I used. Therefore, be careful during installation; don't press too hard, and perhaps twist it slightly until it clicks into place.

I had no problems printing with the P1S and the Bambu Lab PETG HF. Other PETG materials should also work. I haven't tested it with PLA; it might be too tight for installation since PLA is even harder.

As always, printing, assembly, and use you act at your own risk.