P2S No‑Rub PTFE C‑Clips — Cable Chain Holders
Print Profile(2)
Description
P2S PTFE No‑Rub C‑Clips — Snap‑In Cable Chain Guide
This is a small but extremely useful upgrade for the Bambu Lab P2S.
The stock PTFE‑tube clip doesn’t fit well and often causes rubbing against the top glass panel or the frame. The P2S also uses a different cable chain profile, so most existing clips don’t sit correctly.
This model fixes all of that.
Why this design?
- Open C‑Clip → install/remove without disconnecting the PTFE tube
- Internal mounting inside the cable chain → keeps flexibility intact
- Side positioning → no rubbing against the frame + quieter movement
- Anti‑rattle tab → locks into the chain notches with a satisfying click
- Snug, secure, zero play during long prints
- Built‑in positioning latch — the click confirms correct installation.
Installation
- Recommended: 3 clips along the chain
- Remove the factory clip (no longer needed)
- Check PTFE length: many P2S units have a tube ~10 mm too long.
Make sure you can still reach full bed travel before trimming.
Materials
- PETG‑HF, ABS, ASA → recommended
- PLA not recommended → tends to soften in the upper chamber during long prints.
a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
🔧 Print Settings (recommended)
- Material: PETG‑HF / ABS / ASA
- Layer height: 0.2 mm
- Perimeters: 3
- Infill: 30–40% (Gyroid / Grid)
- Support: No
- Wall orientation: Print flat for max strength
- Brim: Optional on ABS/ASA
More useful prints for your Bambu printer
• Bambu Lab P2S Display Cover
• P2S Poop Chute
• Z-Axis Protection Cover
• Pro Tweezers for 3D Printing
• Filament Clip System
Explore the full collection in my profile.
🔧 Functional Engineering Lab
Purpose-built 3D printed solutions.
✔ Tested on Bambu Lab platforms
✔ Tolerance-optimized geometry
✔ Print-efficiency focused
✔ AMS-compatible where applicable
Built to solve real problems.
🚀 If this model helped you, consider using a Boost.
Your support helps fund testing, prototyping and future functional designs.
— Functional Engineering Lab
Function before form.
Explore my profile for more functional tools,
Print & AMS upgrades and workflow solutions.
If this model improved your setup,
a Boost is always appreciated.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)