The Noir Web-Slinger: 1930s Pulp Mystery (10 cm)

🕵️♂️ The Noir Web-Slinger: 1930s Pulp Mystery (10cm Display Model)

"Where I'm from, it's always 1933, the private eyes are always brooding, and the shadows are full of secrets."

Bring the gritty atmosphere of the Great Depression to your desk with this Spider-Man Noir figure. Presented in a dynamic, low crouch pose, this model captures the essence of the pulp-fiction vigilante, complete with his signature fedora and goggles.

This model is scaled up to 10cm tall, making it an ideal display piece for collectors of cinematic and comic book history.

⚙️ Tested Print Settings (FDM Optimized)

This model has been successfully tested with standard FDM setups to ensure an easy printing experience.

• Scale Height: 100mm (10cm).
• Nozzle: 0.4mm Standard.
• Layer Height: 0.12mm (Provides excellent detail definition at this scale without excessively long print times).
• Walls/Perimeters: 2 Loops (Sufficient for a sturdy display model).
• Infill: 10% Gyroid (Optimal balance of strength and material saving).
• Supports: Required for overhangs (e.g., chin, arms). Tree supports are recommended for easier removal.

⚠️ Important Post-Processing Note

Overall, this is a very straightforward print. However, please exercise caution in one specific area during support removal:

• Delicate Fingers: The fingers on the outstretched hands are detailed and relatively thin compared to the rest of the body. Use fine cutters or tweezers and take your time removing supports around the hands to avoid snapping the digits.

Other version here! 👇

And what about the New Spawn 2026 or my Batman? 👇

Technical & Creative Note: This design is based on an AI generation (Tripo) that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.

🛠️ Support the Process!

💡 What you see is what you get: Unlike many profiles that only upload digital renders of unprintable models, every single design here is fully test-printed, refined in Blender/Meshmixer, and optimized for FDM before release.

I spend hours tweaking geometries, custom supports, and wasting my own filament so that you can enjoy a flawless, hassle-free print on your first try.

If my test-printing hours saved your time and filament, feel free to keep my printers running and fuel the next project! Any support is greatly appreciated: paypal.me/mjrko84