INSANELY ACCURATE Oni Phantom From Valorant

THIS PROJECT IS NOT FOR NEW BUILDERS , IT IS EXTREMELY COMPLICATED AND REQUIRES A LOT OF PRECISION , MATERIALS & PATIENCE!

Now that I have that disclaimer out of the way , welcome to the most accurate oni Phantom file you'll ever encounter.
This project was designed for my Ender 3 , so it doesn't fully utalize the bambu machines build space, but nonetheless, they come out great!
 

I also included a white phantom model that has engravings so you can paint the patterns on easier!  ( can be found via the “ download STL ” button ) 

Any pieces that connect together have 2 holes meant for a small piece of filament to fit in to act as an alignment pegs ensuring you glue it together as straight as possible! 

The materials required to complete the project the way it looks in the picture are as follow: 
-Red , Green & Black Paracord
-Tassels
-Faux Leather ( try to find one with a stitched pattern ) 
-Eyelets & Punch
-Circle Leather Punch ( or you can cut the eyelet holes by hand ) 
-( OPTIONAL ) 3/16" steel rod ( about 4ft ) to run down the middle for reinforcement 

( KEEP IN MIND THAT YOU WILL HAVE TO CHOOSE YOUR OWN COLOURS IF YOU DECIDE TO MAKE A DIFFERENT VARIANT ) 

Some small tips / tricks I've learned after making a few of these:
-Due to tolerances , if you choose to use a steel rod , it helps to use the rod as a drill bit and drill out the holes a little bit ( otherwise the hole is VERY tight and requires quite a bit of work to get the rod to fit most of the time )
-A good way to get the leather to fit where it needs to is to put some painters tape down where the leather needs to go , tracing it with a pencil , then sticking the trace onto a piece of paper / cardboard and cut it out to get an accurate stencil ( trust me this will save you a lot of faux leather ) 
- I've attached stencil JPEGs that you can print and then cut out to make your painting way easier ( can't quite remember if these are already scaled , so match them against the 3d print before spending the time cutting them out ) 
- Ive also attached a few patterns from the other variants, though I can't confirm if they're scaled / complete , and the naming is pretty random :P
( it's been QUITE a while since I made this ) 

If you're up for this challenge, good luck! The turnout is insane once you complete it though :D  , I will try and provide as much help as possible