MTB Bike Wall Hanger (up to 660×47, Flat pedal) - Free 3D Print Model

Search models, users, collections, and posts

Mr. Nobody

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

A1 mini

H2C

H2D

P1S

X1 Carbon

P2S

X1E

H2D Pro

P1P

H2S

X2D

A2L

0.2mm layer, 6 walls, 15% infill

Designer

5.9 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

This is a minimalist wall-mounted hanger designed specifically for MTB bikes.
The bike is supported at three points: both wheels and one pedal, keeping it stable and close to the wall.

Wheel supports: Two round wall-mounted holders that follow the curvature of the wheel, so the tire naturally sits in the cradle and cannot slide or move out. Each holder is fixed with two screws and supports road wheels up to 660×47.
Pedal anchor: Dedicated support for flat pedals max. width 110mm, also secured with two screws, preventing the bike from rotating or swinging.
Secure three-point mounting: The curved wheel cradles and pedal anchor work together to keep the bike aligned and stable.
Clean, compact design: Simple geometry with no unnecessary bulk – suitable for garages, apartments, or bike rooms.

Mounting hardware used (tested):

Fischer DuoPower 6×30 wall plugs
T20 4×35 mm screws

Designed for easy printing and solid wall mounting.
A practical and secure wall hanger that safely stores your bike while keeping a clean, unobtrusive look.

Last 5 photos are courtesy of @user_3583480443.
These photos were provided by the user and are shared here with their permission. All credit for the photos goes to them. Thank you for allowing them to be used to showcase the model.

Comment & Rating (5)

@user_3583480443

Hi, sorry for taking such a long time. I just had to get rid of my ex's cats before I could drill in the concrete (solid, communist concrete in Poland - it ain't easy and makes lots of noise). The hanger is a perfect fit, I used DuoPower 8x40 wall plugs and the screws that were in this set fit the cutout in the hangers perfectly. If you need any more photos, I can also upload them

The designer has replied

@mr.nbd

Hi, thank you very much, I really appreciate it. We all have things to take care of, so there’s no need to apologize. I’m glad you like it. If you could take a few more photos from a closer perspective, I think it would help others decide whether this is what they’re looking for.

@user_3583480443

Replying to @mr.nbd :

Here you are, a few more photos

@mr.nbd

Replying to @user_3583480443 :

Perfect! Thank you!

@The_Think3r

Print Profile

0.2mm layer, 6 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.