Nerf Elite dart magazine (5, 8 & 10 rounds)

Nerf full length elite dart magazine. Compatible with most blasters. With a printed spring.

Feature symmetrical design so you can insert it both ways. 
Should be compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo).

Printing the magazine

Print body, floor plate and follower in whatever material you want.

Printing the spring

For the spring, print in PETG (PLA might work, but it will lose its springiness very quickly)

You can change the spring stiffness by playing with the horizontal expansion settings to make it thicker or thinner or scaling it's width (height if you print it flat).

Springs are super dependent on the exact materials and settings. So while the provided springs should work as is, you might have to experiment a bit to get the best results.