The Cabin HO and N Scale

This little cabin in the woods is easy to assemble with minimal finishing required.  The windows and doors are installed from the inside with a little glue to hold in place.  The chimney slides through the roof into the fireplace.  The door can be opened however the interior is quite dark so you may want to add some custom lighting.

HO Scale: The main cabin can be printed at .16 mm layer height, windows and doors at .8mm so the layers will be crisp, the roof and chimney at .12 mm for details.  Manual supports are used where necessary (the chimney requires supports to prevent it from detaching).  The windows and frames are painted using the fill tool. The roof trim is painted using a white acrylic paint pen.

N scale  - unlike the HO scale model, the chimney is glued into the roof and the front posts are printed separately.  

Bambu Dark Brown,  Ash grey, Ivory white, grass green, scarlet red. Filaments used are all matte with exception of silver PLA basic for the roof pipes.