Pikachu Illustrator
Print Profile(1)
Description
Boost Me (for free)
For you it's free, for me it's a lot
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 122x170mm in size
PLA BambuLab Basic Black
PLA BambuLab Basic BambuLab Green
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Red
PLA+ Sunlu Silver
PLA BambuLab Basic Gold
PLA BambuLab Basic Sunflower Yellow
PLA BambuLab Basic Jade White
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to BambuLab Green
At layer #10 (0.88mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Red
At layer #15 (1.28mm) swap to Silver
At layer #18 (1.52mm) swap to Gold
At layer #22 (1.84mm) swap to Sunflower Yellow
At layer #24 (2mm) swap to Jade White for the rest.
Frame Version:
At layer #27 (2,24mm) swap to Jade White for the rest.
Check out my other Pokémon-themed projects here!
For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually.
Please note that using different brands or colors than those listed may change the final look, so I cannot guarantee the same result. Additionally, I strongly advise against using Silk filaments as they will likely ruin the effect.
Boost Me (for free)
For you it's free, for me it's a lot
☕ Support my projects. A small gesture to help me create and test new models every day.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)