Francesco C.

cover

1000092712.jpg

e9f25ada-eae3-40e5-8cbe-0d747b1a09f3.png

plate_1.png

9b7a08b1b5cdc5c8.png

mia.png

<h3>🔧 Profilo di stampa – PLA (Bambu Lab A1)</h3><ul><li><strong>Ugello:</strong> 0.4 mm</li><li><strong>Altezza layer:</strong> 0.2 mm (standard qualità)</li><li><strong>Temperatura nozzle:</strong> 200–220 °C</li><li><strong>Piatto:</strong> 55–60 °C</li><li><strong>Ventola:</strong> 100% dopo i primi layer</li><li><strong>Infill:</strong> 15–20% (Gyroid o Grid)</li><li><strong>Perimetri:</strong> 3 pareti</li><li><strong>Velocità:</strong> profilo standard A1 (Sport opzionale)</li><li><strong>Supporti:</strong> non necessari (se stampato orientato correttamente)</li><li><strong>Brim:</strong> opzionale 3–5 mm se necessario</li></ul>

<h3>🔧 Print Profile – PLA (Bambu Lab A1)</h3><ul><li><strong>Nozzle:</strong> 0.4 mm</li><li><strong>Layer Height:</strong> 0.2 mm (standard quality)</li><li><strong>Nozzle Temperature:</strong> 200–220 °C</li><li><strong>Bed:</strong> 55–60 °C</li><li><strong>Fan:</strong> 100% after the first layers</li><li><strong>Infill:</strong> 15–20% (Gyroid or Grid)</li><li><strong>Perimeters:</strong> 3 walls</li><li><strong>Speed:</strong> standard A1 profile (Sport optional)</li><li><strong>Supports:</strong> not necessary (if printed with correct orientation)</li><li><strong>Brim:</strong> optional 3–5 mm if needed</li></ul>

0.2mm layer, 2 walls, 15% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<h2>🚗 Porta Ombrello per Ganci TOP TETHER (Cofano / Schienale Posteriore)</h2><p>Porta ombrello progettato per essere agganciato ai <strong>ganci TOP TETHER</strong> presenti nel bagagliaio o dietro gli schienali posteriori dell’auto.</p><p>Perfetto per tenere l’ombrello fermo, ordinato e facilmente accessibile senza che rotoli nel baule.</p><h2>📏 Dimensioni</h2><ul><li>Altezza: <strong>128 mm</strong></li><li>Larghezza: <strong>71 mm</strong></li><li>Spessore: <strong>17 mm</strong></li><li>Struttura a doppio gancio con supporto di stabilizzazione laterale</li></ul><p>Compatibile con la maggior parte dei ganci TOP TETHER standard (verificare sempre la forma del proprio veicolo).</p><h2>🧵 Materiale</h2><p>Stampato in <strong>PLA</strong></p><p>✔ Facile da stampare<br>✔ Nessun supporto necessario<br>✔ Ottima rigidità</p><p>⚠ Nota: in estate, in auto chiusa al sole, il PLA può deformarsi oltre i 55–60°C.<br>Per maggiore resistenza termica si consiglia:</p><ul><li>PETG</li><li>ASA</li><li>ABS</li></ul><h2>🖨 Impostazioni di Stampa Consigliate</h2><ul><li>Layer height: 0.2 mm</li><li>Infill: 30–40%</li><li>Wall line: 3–4</li><li>Top/Bottom: 5 layer</li></ul><p>Per maggiore robustezza:</p><ul><li>Infill 50%</li><li>4 pareti</li></ul><h2>🔧 Funzionamento</h2><ul><li>Il piccolo incastro laterale blocca il supporto sul gancio TOP TETHER.</li><li>I due ganci curvi sostengono l’ombrello (chiuso).</li><li>Design compatto per non interferire con lo schienale.</li></ul>

<h2>🚗 Umbrella Holder for TOP TETHER Hooks (Trunk / Rear Seat Backrest)</h2><p>Umbrella holder designed to attach to the <strong>TOP TETHER hooks</strong> located in the trunk or behind the rear seatbacks of the car.</p><p>Perfect for keeping the umbrella secure, tidy, and easily accessible without rolling around in the trunk.</p><h2>📏 Dimensions</h2><ul><li>Height: <strong>128 mm</strong></li><li>Width: <strong>71 mm</strong></li><li>Thickness: <strong>17 mm</strong></li><li>Double hook structure with side stabilization support</li></ul><p>Compatible with most standard TOP TETHER hooks (always check your vehicle's hook shape).</p><h2>🧵 Material</h2><p>Printed in <strong>PLA</strong></p><p>✔ Easy to print<br>✔ No supports needed<br>✔ Excellent rigidity</p><p>⚠ Note: in summer, in a car closed in the sun, PLA can deform above 55–60°C.<br>For greater thermal resistance, we recommend:</p><ul><li>PETG</li><li>ASA</li><li>ABS</li></ul><h2>🖨 Recommended Print Settings</h2><ul><li>Layer height: 0.2 mm</li><li>Infill: 30–40%</li><li>Walls: 3–4</li><li>Top/Bottom Layers: 5</li></ul><p>For increased strength:</p><ul><li>Infill 50%</li><li>4 walls</li></ul><h2>🔧 Operation</h2><ul><li>The small side interlock secures the holder to the TOP TETHER hook.</li><li>The two curved hooks hold the umbrella (closed).</li><li>Compact design to not interfere with the seatback.</li></ul>

Print Profile(1)

Description

🚗 Umbrella Holder for TOP TETHER Hooks (Trunk / Rear Seat Backrest)

📏 Dimensions

🧵 Material

🖨 Recommended Print Settings

🔧 Operation

Comment & Rating (1)

License

Related Models

Umbrella Holder for TOP TETHER Hooks (Trunk)