Sonoff SNZB-05P Water Sensor Mount

This is only a print profile from for a Sonoff SNZB-05P Water Sensor Mount.

The design is from calipsoii on printables, please see link below!
Thanks for your work.

Source:

https://www.printables.com/model/1312946-sonoff-snzb-05p-water-sensor-mount

Here is the original description for the maker on printables:

This holder allows you to mount a Sonoff SNZB-05P water sensor to any surface in any orientation. It features a snug fit and retaining arms so the sensor can even be mounted upside-down. The sensor is easily removed for battery changes. Can be secured using double-sided tape or via the #6 chamfered screw hole in the center.

Print Settings

The assembly in the pictures was printed at the following settings:

• Printer: Prusa i3 MK3.5
• Print Settings
  • 0.4mm nozzle
  • 0.2mm layer height
• Filament: generic white PETG
• Supports: none
• Brim: none

Print Instructions

1. No supports required, no brim needed. Delivered in the proper orientation for printing.

Assembly Instructions

1. Simply print the sensor holder and mount it to your desired surface using either double-sided tape or with a #6 wood screw.
2. Enjoy!

Happy Printing!