Compressor Wheel – 12mm Shaft

Custom-designed compressor wheel with a 12mm center bore, built for functional mechanical use. The reinforced triangular internal structure increases strength and durability.

I have been using this wheel for over 2 years and it is still working reliably without issues.

For best performance and load resistance, it is recommended to print in PETG, ABS, ASA. PLA is not recommended for high-load or elevated temperature environments.

Recommended print settings (Bambu Slicer):

• 4–6 walls
• 40–60% infill (Gyroid or Cubic)
• 0.2 mm layer height
• 5 top / 5 bottom layers
• Print with 100% fan off for ABS/ASA
• Increase wall thickness rather than only infill for better strength

Designed for durability and functional applications.