Twist Fidget with 3 Nut Options

THE TWIST FIDGET EXPERIENCE

The Modular Simple 3 Part System with Options

The Twist features an integrated M6 threaded top. This allows you to easily swap between the three included nut designs or add more as you go. Secure the "Top Cap" to keep your nuts from flying off during intense fidgeting. The screwing part is smooth and effortless, yet holds in place - means no accidental loss of nut(s). 

Three Nut Designs Included:

• Gear Edge: Maximum grip for quick flicks.
• Smaller Gear Edge: Smoother, ergonomic "bites" for comfortable spinning.
• Hexagon: If you feel like there is too much gear.

Print Settings:

• Twist: 3 Walls, 15% Infill. Print vertically.
• Brim: My profile has the brim turned off (tested on SuperCool Tack), but if you are using a standard PEI plate, add a 5mm brim for stability.
• Supports: None needed for any parts.
• Layer: 0.16mm (for the threads)
• Nuts: Print flat on the plate.
• Top Cap: Print head-down (screw facing up).
• NO AMS: AMS is not needed, unless you really want to have the spindle in multiple colors.

Note: if you want different size, you can try “scale” feature - but remember to scale or 3 parts to the same percentage. Scaling down might be tricky, as it might negatively affect the top cap screw. 

If you have requests for “nut” designs, let me know, happy to create more!

Check my other models.