Bane - The Dark Knight Rises Urban Figure

Bane - The Dark Knight Rises Urban Figure

A highly detailed and carefully modeled depiction of Bane from the Dark Knight Rises. This dominating figure designed to stand ominously and intimidatingly on your desk or shelf. Multipart model, with AMS needed for the eyes - or print in single colour and paint. 

Bane is a massive, muscular figure who uses a brutal, heavy-handed fighting style to break his opponents. He is one of the few foes to physically dominate Batman in combat.

The iconic mask is not for strength enhancement, but rather acts as an anesthetic apparatus, delivering gas to alleviate constant, excruciating pain from injuries sustained in "the Pit". He is intelligent, patient, and intensely focused on psychological torment.

He is the primary antagonist during the dark knight rises and, alongside Talia al Ghul, leads a revolution in Gotham, using populism and terror to destroy the city, rather than just conquering it. He serves as a fiercely loyal protector and friend to Talia al Ghul. 

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm
• Infill: 15%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optional fix: Use glue for permanent assembly.

NOT AI, NO AI COLOUR PICS WHICH DISGUISE A POOR DETAILED SINGLE COLOUR PRINT. REAL PRINTED RESULTS!

MOST OF MY MODELS ARE FAN ART RECREATIONS AND ARE FOR PERSONAL USE ONLY  : MY MODELS ARE UNOFFICIAL FAN ART AND ARE NOT AFFILIATED OR ENDORSED BY THIRD PARTY IP HOLDERS

Thankyou to everyone who has rated and boosted my prints, if you like the models and want to continue to support the creation of more please consider boosting, it really does help incentivise the creation of more models for makerworld. 

If you would like to "buy me a coffee" to support the continued creation of fun prints you can do so here;

All of my models posted here are free for you to use commercially for free. I make them as a hobby and a bit of fun, with the points helping supply filament and consumables. All i ask if you wish to support my designs and want to sell them is that you are aware of the IP infringement which apply to some of the models and take appropriate responsibility. Please also boost them as much as you can and help with the points and please correctly attribute the model design to this page in your descriptions etc - Thankyou again everyone!