Kitchen Appliance Cleaning Helper DualEdge Scraper

A simple but very practical cleaning tool for the kitchen.

This dual-edge scraper was designed to remove dough residue, dried food, grease buildup and other deposits from kitchen appliances and surfaces.
It works especially well on mixers, bowls, baking trays, worktops, and hard-to-reach corners where a sponge is ineffective.

The tool has two working sides:

• a wide flat blade for larger areas and stuck-on residue
• a narrow peeling edge for corners, seams and tight gaps

The geometry is intentionally rigid enough to scrape off deposits, but still gentler than metal tools.

Material recommendation
I strongly recommend printing this in PETG.
PETG has a bit of flexibility and lower hardness than PLA, which reduces the risk of damaging surfaces and makes the tool more forgiving during use. PLA works, but it is harder and more brittle and therefore more likely to scratch.

Printing

• 0.4 mm nozzle (standard profile works fine)
• 3–4 perimeters recommended for durability
• No supports required

Important notice / disclaimer
This tool is used at your own risk.
I cannot guarantee compatibility with all materials or coatings. Depending on the surface, scratches or marks may occur. I assume no liability for damage to kitchen appliances, coatings, glass, plastics, or other surfaces.

Not a food-contact certified product and not intended for contact with prepared food. Clean the tool before and after use.