Star Wars Logo

Star Wars logo

This model is free - May the Force be with you.

Prints in parts on 2 plates. One for the background, and one for the letter outlines. This separates the colours for those without an AMS. 

Tight tolerances which allows the pieces to click in and hold for a semi-permanent option. This is very satisfying when assembling. Be careful to align correctly before pushing in as they can be tight if not done evenly. Ensure the yellow printed pieces face down when assembled to the base. 

Use glue to hold the pieces together for a permanent solution.

Modelled from scratch to allow the pieces to overlap by a minimum 16mm.

There are 2 different design profiles available:

• The standard - which is the same scale and thickness as all my other designs. Roughly 30mm font height and specifically modelled to be uniform at 24mm thick. This profile is best for sitting directly on a bench, shelf, desk or table. It is thick which allows it to stand on its own without falling over. Great balance of size and filament.
• The large - which is scaled to as big as a 256x256 plate will fit. Usually will fit within the plate dimensions by more than 98%. This is the same thickness as the standard profile and is able to stand on its own. This is the best profile overall but the most expensive to print.

Due to the tight tolerances, these prints do not scale well. If you wish for another size that is not available, contact me and i'll see what I can do. You can attempt to resize yourself, although it may not fit together well.

Check out all Signs, Logos and Magnets created by ClickKey Here: https://makerworld.com/en/collections/21018690-signs-logos-and-magnets