200% scale EduColon remix capsule holder 3D printed window part

Summary
This part is designed as an alternative to the 5x7 inch (127x178mm) window part used in the 'Remixed Capsule Holder for 200% Scale EduColon' published on Maker World

The original model uses a self-made 1mm thick acrylic or PETG sheet as the window However, to allow for use even without a transparent sheet, two types of window parts that can be made solely by 3D printing are provided: 'Honeycomb structure' and 'Voronoi structure'

Both are lightweight, highly transparent, and designed for easy printing with PLA You can choose based on your purpose or aesthetic preference

Reference model:
'Remixed Capsule Holder for 200% Scale EduColon'
https://makerworld.com/ja/models/1258546-remixed-capsule-holder-for-200-scale-educolon

Features
・Compatible with 5x7 inch (127x178mm) size
・Lightweight design with an overall thickness of 1mm
・Securely fixed with a 6mm outer frame thickness
・Frame and internal pattern are integrally molded for durability
・Easily printable with PLA
・Can be used as a window even without a transparent sheet

【Honeycomb structure】
・Regular honeycomb pattern with 6mm sides
・Good balance of strength and visibility
・Ideal for practical customizations

【Voronoi structure】
・Randomly generated Voronoi pattern
・Highly decorative and ideal for visual accents
・Lightweight design with high visibility

Design Specifications
Outer dimensions: 127 x 178 mm
Overall thickness: 1mm
Outer frame thickness: 6mm
Honeycomb side length: 6mm
Wall thickness: 0.8-1.0mm

Recommendation
Supports: Not required (frame and internal pattern are integrally molded)

Recommended Print Settings
Material: PLA
Nozzle: 0.4mm
Wall thickness: 0.8-1.2mm
Infill: 0% (internal pattern is formed by the model's geometry)
Supports: Not required
Bed temperature: 50-60°C (PLA)