Police Inspector ~ Mystery Character : #50

Police Inspector ~ Mystery Character : #50

#25 Police Inspector — Inspector George Blackwell

Job: Oversees investigations and commands police authority.

Personal: Serious, methodical, and weary of excuses. Believes most crimes are solved by patience, not brilliance.

____________________________________________________________________________________________________

OTHER MODELS AVAILABLE

When I have all uploaded. . .

Whitcombe Family Member

Daughter of the House ~ Mystery Character : #14

Lady of the House ~ Mystery Character : #30

Master of the house ~ Mystery Character : #40

Mother-in-Law (Lady's Mother)~ Mystery Character : #42

Mother-in-Law (Master's Mother) ~ Mystery Character  : #44

Son of the House ~ Mystery Character : #60

Whitcombe Indoor Employee

Butler ~ Mystery Character : #1

Cook ~ Mystery Character : #10

Estate Steward ~ Mystery Character : #16

House Keeper ~ Mystery Character : #26

Kitchen Maid ~ Mystery Character : #28

Lady's Maid ~ Mystery Character : #32

Laundry Maid ~ Mystery Character : #34

Main Maid 1 ~ Mystery Character : #36

Main Maid 2 ~ Mystery Character : #38

Nurse ~ Mystery Character : #46

Scullery Maid ~ Mystery Character : #58

Still-room Maid ~ Mystery Character : #62

Valet 1 ~ Mystery Character : #64

Valet 2 ~ Mystery Character : #66

Table Decker ~ Mystery Object : #83

Whitcombe Outdoor Employee

Coachman (Older) ~ Mystery Character : #4

Coachman Groom ~ Mystery Character : #6

Coachman Young ~ Mystery Character : #8

Dairy Maid ~ Mystery Character : #12

Gamekeeper #1 ~ Mystery Character : #18

Gamekeeper #2 ~ Mystery Character : #20

Gardener #1 older ~ Mystery Character : #22

Gardener #2 younger ~ Mystery Character : #24

Inanimate Object

Ash Bucket : #2

Bookcase : #3

Broom & Dustpan (Stored Too Neatly) : #5

Coal Scuttle : #7

Desk Bell (For Summoning Staff) : #9

Drawer Unit Locked : #11

Empty Bottle with the Cork Still In : #13

Hall Mirror (Slightly Clouded or Cracked) : #15

Handkerchief (Blood Covering Monogram not legible) : #17

Handkerchief (Monogrammed) : #19

Hat Stand / Coat Rack : #21

House Ledger / Appointment Book : #23

House Ledger / Appointment Book (Open with signatures) : #25

Jewelry Box (Empty) : #27

Jewelry Box (Half-Full) : #29

Key Cabinet (Some Labeled, Some Not) : #31

Laundry Basket (Empty) : #33

Laundry Basket (one item draped over the edge) : #35

Letter Written in Code : #37

Letter Written in DECODED : #39

Locked Drawer Unit (Small, portable) : #41

Newspaper (Folded to One Article Faded Headline) : #43

Pocket Watch (Closed) : #45

Pocket Watch (Same as Closed Pocket Watch with Broken Chain) : #47

Pocket Watch (Same as Closed Pocket Watch BUT OPEN) : #49

Reading Glasses (Folded, Set Down Carefully) : #51

Rolled Blueprints / Plans : #53

Sealed Envelope (with Stamp, No Address) : #55

Serving Tray (Plain) : #57

Serving Tray (Same Tray with Ring Marks) : #59

Shoes by a Door (Similar BUT un-matching pair) : #61

Spare Wooden Table Chair : #63

Torn Letter (Only Half Present) : #65

Umbrella Stand (One Missing Umbrella) : #67

Arm Chair 1 ~ Mystery Furniture : #68

Wall Clock (Stopped or Slightly Off-Time) : #69

Arm Chair 2 ~ Mystery Furniture : #70

Arm Chair 3 ~ Mystery Furniture : #71

Coffee Table 1 ~ Mystery Furniture : #73

Coffee Table 2 ~ Mystery Furniture : #75

Fireplace TOOLS ~ Mystery Furniture : #79

Painting ~ Mystery Furniture : #81

Law Enforcement

Plain Clothes Police detective~Mystery Character : #48

Police Inspector ~ Mystery Character : #50

Police Patrolman Bobby ~ Mystery Character : #52

Private Investigator ~ Mystery Character : #54

Private Investigator's Asst. ~ Mystery Character : #56

Neighbor (Ashcombe's)

Witness ~ Clara Whitcombe (Sister-in-Law) : #78

Witness ~ Margaret Finch (Friend of Clara) : #80

Neighbor Employee (Ashcombe's)

Neighbor's Butler Thomas Whitlock : #82

Neighbor's Maid Elise Harrow : #84

Neighbor's Chauffeur Arthur Bellamy : #85

Neighbor Family Member (Ashcombe)

Neighbor ~ Earl Edmund Ashcombe : #72

Neighbor ~ Lady Beatrice Ashcombe : #74

Neighbor ~ Ashcombe's Son Julian : #76

Victim

Victim 1 ~ Mystery Character : #86

Victim 2 ~ Mystery Character : #87

Victim 3 ~ Mystery Character : #88

Victim 4 (Female) ~ Mystery Character : #89

Victim 6 ~ Mystery Character : #90

Victim 7 ~ Mystery Character : #91

Victim 8 ~ Mystery Character : #92

Victim 9 ~ Mystery Character : #93

_______________________________

STARTER MYSTERY SCENARIO

_______________________________

Printer Settings:

Take time to use these settings for optimal prints. Note: Smartphones and tablets cannot print with Tree supports, so use a PC for these settings.

Bambu Studio Settings

Printer Settings

• Nozzle Diameter → 0.4 mm

• Compatible Material → PLA+

Filament Settings

• Nozzle Temperature (first layer) → 205 °C

• Nozzle Temperature (others) → 200 °C

• Bed Temperature (first layer) → 60 °C

• Bed Temperature (others) → 50–55 °C

• Cooling Fan:

◦ Layer 1–2 → OFF

◦ Layer 3+ → 100%

Quality

• Layer Height (Standard) → 0.20 mm

• Initial Layer Height → 0.20 mm

• Line Width → 0.45 mm

• Elephant Foot Compensation → 0.15 mm

Speed

• First Layer Speed → 20 mm/s

• Outer Wall Speed → 35 mm/s

• Inner Wall Speed → 50 mm/s

• Infill Speed → 50 mm/s

• Travel Speed → 120 mm/s

Acceleration / Jerk

• Default Acceleration → 1000 mm/s²

• Outer Wall Acceleration → 500 mm/s²

• First Layer Acceleration → 300 mm/s²

• Travel Acceleration → 2500 mm/s²

• Jerk (XY) → 8 mm/s

Strength / Infill

• Wall Loops → 3

• Top Layers → 4

• Bottom Layers → 4

• Infill Density → 20%

• Infill Pattern → Gyroid

• Sparse Infill Anchor Length → 5 mm (🔔 Note: increase to 10 mm if you see weak infill connections)

Skirt & Brim

• Skirt Loops → 3

• Skirt Distance → 2 mm

• Skirt Layers → 1

Retraction

• Retraction Distance → 4 mm

• Retraction Speed → 40 mm/s

• Z-Hop → 0.2 mm

• Wipe While Retracting → Enabled

• Retract on Layer Change → Disabled

• Minimum Travel Before Retraction → 1.0 mm

Supports

• Support Style → Tree

• Top Contact Z Distance → 0.25 mm (detachable, fixed)

• Support Density → 15%

• Support Interface Pattern → Grid

• XY Distance → 0.5 mm

• First Layer Support Gap → 0.3 mm

Consider 'Annealing' your chess set.

Annealing your PLA models can improve strength by 10–20%. If you plan to use the set regularly, I highly recommend it. For display or occasional play, annealing is optional, and the appearance and finish remain unchanged.

🔗 More info: [Annealing PLA Prints for Strength — Easy Ways (All3DP)]

https://all3dp.com/2/annealing-pla-prints-for-strength-easy-ways/