Lion love - Hueforge

Lion lovers - hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

#bb3d43 PLA Bambu Dark Red Transmission Distance: 0.2

#ffffff PLA sunlu white Transmission Distance: 6.8

#000000 PLA sunlu Black Transmission Distance: 0.1

#5b6579 PLA BambuLab Basic Blue Gray Transmission Distance: 2.2

This print uses 4 unique filaments

Swap Instructions:

Start with Bambu Dark Red

At layer #8 (0.72mm) swap to sunlu white

At layer #10 (0.88mm) swap to sunlu Black

At layer #12 (1.04mm) swap to BambuLab Basic Blue Gray

At layer #15 (1.28mm) swap to sunlu white for the rest.