Team USA 2026 Winter ~ Oversized Hype Chain

All Compatible Lightbox Frames & Mounts Available Here!
 

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues)         Magnets (for optional mounts)

Recommended LED Light Strips     Battery Powered LED Light Strips     Double Sided Tape for Lens: Optional

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Show your pride for Team USA with this oversized 2026 Winter hype chain, inspired by the Milano Cortina games.

This bold medallion features layered mountain graphics, strong red/white/blue contrast, and raised text for a clean multi-color print that really stands out.

Dimensions

• 210 mm x 195 mm
• 9 mm thick

Features

• Multi-color print (AMS friendly)
• Raised lettering and layered design
• Clean plate setup for easy printing
• Great for game watch parties, school spirit, or display
• Chain links are included on Plate #2

Chain Links Credit:
Chain links were designed by Billrobland and are included from this model:
https://makerworld.com/en/models/25960-chain-links-for-logo-s-with-video#profileId-22348

Printing Notes:

• Prints great in PLA or PLA+
• Scale up or down as desired
• Works well as a wall hanger, wearable hype chain, or display piece

Print in classic patriotic colors or remix it to fit your own style. Wear it loud, hang it proud, or scale it down for a smaller version.

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.