EAP-01 Light Carbine Kit (Ruger Slotless MK4)

Hardware configuration:

You will need to provide one 85mm 14mm counter-clockwise threaded outer barrel

Stock screws: two M5x25 cap head screws, two M5 nuts, three M2.5x6 cap head screws, three M2.5 nuts

Outer barrel screws: three M2.5x6 flat head screws, three M2.5 nuts

Magazine well: one M4x10 flat head screw, one M4 nut

Please note: if the iron sights are screw-fixed, use glue to secure the counter-clockwise threaded outer barrel inside the printed outer barrel. Conversely, if the counter-clockwise threaded outer barrel is screw-fixed, then use glue to secure the iron sights