Gelatinous_Assassin

cover

423735690_1169996607322642_3228756520597160712_n_fce58d34-369f-4340-b075-8e8a26ffff4b.jpg

423766354_942279110884146_4519119327783193715_n_58028daf-e126-451b-b191-4c8817c2e8dc.jpg

plate_1.png

423735680_3729496477289097_9023853039334412842_n_2ee502c9-aaad-42fb-b0eb-9342c0da0087.webp

plate_1.webp

423735690_1169996607322642_3228756520597160712_n_b0552a9d-0116-4028-96d4-deff29b3fbc7.webp

423766354_942279110884146_4519119327783193715_n_7eed6975-5333-4c61-9826-bb2be86d5b64.webp

423619341_1485322482049350_226354165680249660_n_eb7845f4-17ae-4dd9-bf4c-ec32981d63b6.webp

I printed this with PRILINE PC-CF.  It's angled at 45 degrees on the built plate to try and help with the overhang on the vent insert.  Please see the other photos to see how this overhang printed for me.&nbsp;0.6mm nozzle0.24mm layer height15% gyroid infillEngineering plate with PVA glue stick for adhesion/releaseI did not use the AMS for this and printed directly from a sunlu S2 filament dryer.Please ensure you have properly dried your filament before printing.  The PC-CF is finicky to work with.

0.6mm nozzle, 0.24mm layer, 4 walls, 15% infill

This is a Holley Sniper EFI dash mount for a round vent Suzuki Samurai 1986 to 1988.5 I believe. I have a 1988 so that it was I designed with. This snaps into place in one of the dash vents. You will need to remove the air flow director in the vent you wish to use.&nbsp;I printed this in Priline PC-CF and while not perfect the imperfections in the overhang do not affect the operation and are not visible when installed. I've enabled remixes in case others want to tweak settings and upload alternates.

Holley Sniper EFI Screen Mount for 1986-1988 Suzuki Samurai (round vent)

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models