Search models, users, collections, and posts

Succubus

桥
Miniatures>People
IP Report

Print Profile(1)

All
P2S
H2D Pro
H2C
P1P
H2S
X1
X1 Carbon
A1 mini
A1
X1E
H2D
P1S
X2D
A2L
0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
3 h
1 plate
4.9(11)
Open in Bambu Studio
Boost
268
945
14
4
227
99
Released 

Description

Content has been automatically translated.
Show original

The design is finished and printed, but the printing process was not smooth.

The model has too little contact area with the build plate, making it prone to print failure. A1 series users should attempt with caution.

Supports are difficult to remove, requiring tools. Sprue cutters are essential. If you want to print, you can challenge yourself.

The set profile is for official PLA printing; PETG supports have not been tried yet.

If you can overcome the above difficulties, you can try

Boost Me (for free)

printing this model.

 

Succubus
Warcraft
World of Warcraft
Warcraft
Girl
Mythology
Western Mythology
Western

Comment & Rating (14)

(0/1000)
@Rohezahl
I scaled the model to 50mm and printed it with a layer height of 0.08mm. Removing the supports took a little longer and you have to be very careful with it
Show original
designer
3
Reply
@user_2597190839
Awesome!!! Thanks for the heads up!!!
0
Reply
@cndoconnor
Print Profile
0.2mm layer, 2 walls, 10% infill
she was easy to do I did upsize her she printed out great it took me about a week to get her all printed out and looking good thank you for this model
profile
2
Reply
@user_2597190839
That's quite a bit of time and effort, but SHE LOOKS👌🏽AMAZING!!! GOOD JOB!!!!
0
Reply
@user_1309979478
Print Profile
0.2mm layer, 2 walls, 10% infill
👍🏻
0
Reply
@Susanoo250
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@LordGT
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@steveeberhardt
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@user_4221066313
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@user_1907329723
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@Rohezahl
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
@cyr25
Print Profile
0.2mm layer, 2 walls, 10% infill
(Edited)
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

There are no related models yet