Ram Dash mount for Ram ball equipment

This is a 2014 Ram truck dash mount for Ram ball equipment to mount to on the dash of a ram truck. I also have a Furrion rv camera monitor ball to Ram ball conversion mount. 

When mounting the Ram balls to the dash mount you can use a M6 insert then use a 30 mm m6 bolt through the bottom and drive it all the way to the top I made the threads in the balls to use as a one time thread this will give a compression fitting for added strength. I imagine you could skip the insert and just drive the m6 though and it would have enough strength without the insert. 

I will try and add the arms to the Ram mount later once I have a good design, but there are lots on makerworld to find for now. 

Updates:

3-5-26:  Added 1 2 and 3 Ram mounts on the Truck mount so you can pick how many you want for your truck. Strengthened the walls for a better print and stronger throughout model. Added stronger bolt slots for a stronger hold to truck.

4-7-26: Added centering cubes for the ball attachments and the inserts for the ball attachments to the base so when in use the balls will not swivel side to side keeping the item on the ram mount stable centered. V2 also has a profile for PPA-CF with center CF filament from Siraya Tech Fibreheart PPA-CF Core Black which is one of the strongest and highest temp filaments around that works with Bambu H2D. You can switch it to the filament of your liking but this one works if you use it. Removed the M6 insert hole and made it 5.7 mm for a m6 bolt, now you just Ram the bolt through the bottom of the base and through the ball mount, the bolt adds a compression fitting stronger and I have found the insert added no extra strength.