Nigel Mansell World Champion F1 HueForge
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07176mm
You can change the x and y values but NOT the z value
Black Transmission Distance: 0.3
Blue Transmission Distance: 6.5
Red Transmission Distance: 7
Yellow Transmission Distance: 9
White Transmission Distance: 5
Swap Instructions: (If you only have one AMS: select black where the white is in print sequence. Once the black layers print, take the black spool out for white in your AMS).
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)