MOZA Multi-function Stalks Cancelling Ring

An adapter to allow the self-cancelling function to work on the Moza Multi-Function Stalks when using a third-party wheel.  This was designed to work with SimCore extensions and has been tested with the UH1-105 but should be equally at home with the UH1-75 and UH1-55.

The adapter will work with most 55+mm long extensions with a 57mm OD.  It is meant to be tight and feel perhaps a little small, this is to create enough friction to hold it in place.

For these I've used 4 x M4x10mm socket head screws but the design fits M4x8 better (I just didn't have any to hand).  These screws will self tap into the design, so no other parts are necessary.

Note: If this doesn't fit your needs - let me know the measurements of your wheel/extension and I'll happily adapt it.