Industrial-Grade Heavy Duty Anti-Vibration Feet

Industrial-Grade Heavy Duty Anti-Vibration Feet (PETG-CF & TPU)

Stop your 3D printing station from shaking! These heavy-duty feet are engineered to stabilize tables and workbenches used for high-speed 3D printers like the Bambu Lab A1, P1S, or X1C. By lowering the center of gravity and providing a massive contact area, they eliminate the "sway" caused by aggressive printer movements.

Key Features:

• Massive Footprint: An 80x80 mm base with a 60 mm diameter core provides extreme lateral stability.
• Hybrid Damping: Combines the rigid strength of Carbon Fiber (PETG-CF) with a soft, energy-absorbing TPU insert.
• Low Profile: Total height is only 45 mm (40 mm leg + 5 mm pad), keeping your printer as stable as possible.
• Extreme Grip: The specialized bottom surface pattern ensures the table stays exactly where you put it.

⚙️ Recommended Print Settings

1. Rigid Leg (Main Body):

• Material: PETG-CF (Highly recommended for stiffness and look).
• Walls/Loops: 4-5 (Crucial for structural integrity).
• Infill: 15-20% Grid.
• Top/Bottom Layers: 5.
• Orientation: Print upside down (base plate on the bed). No supports needed.

2. Damping Pad (Insert):

• Material: TPU 95A.
• Walls/Loops: 2 (Allows for compression).
• Infill: 15% Gyroid (Acts as a mechanical spring).
• Bottom Surface Pattern: Hilbert Curve (Provides excellent anti-slip properties).

🛠️ Assembly Instructions

1. Mount the PETG-CF legs to your wooden board or table using 4 screws per leg.
2. The mounting holes: 3mm diameter and 7mm outter fillet diameter
3. Press-fit the TPU damping pads onto the bottom of the legs.
4. (Optional) For a permanent bond, use a small piece of double-sided foam tape inside the TPU cup.