Search models, users, collections, and posts
Rain Deflector Tesla M3/MY
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 100% infill
Designer
1.4 h
3 plates
Open in Bambu Studio
Boost
5
30
0
0
17
5
Released
Description
Content has been automatically translated.
Description: This is a rain deflector I designed to prevent water spray and streaks on the driver and passenger side windows while driving in the rain (or when using the windshield washer fluid)
Printing and Assembly Instructions:
- Parts required: You need to print the curved part ("start") once and the part with a single notch ("end") once
- Customization: Personally, I printed the middle part twice to extend the deflector higher above the window, allowing the water to drain further up
- Installation: Simply overlap the notches to fill the gap in the weatherstripping above the window pillar (see pictures)
- Fitment: If there is still a gap or if the strips move, overlap the notched section with the solid section to increase the overall thickness for a snugger fit
- Finishing: I didn't glue the parts together, but you can certainly do so once everything is perfectly calibrated
Recommended Settings:
- Material: ASA is highly recommended to withstand high summer temperatures and UV exposure
- Layer Height: 0.2mm
Infill: 100% for durability and strength
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)