Search models, users, collections, and posts
L3GO John Wick Gun Toy Legocompatible
IP Report
Print Profile(1)
0.2mm nozzle, 0.1mm layer, 4 walls, 20% infill
Designer
38 min
1 plate
Open in Bambu Studio
Boost
61
127
1
1
77
44
Released
Description
- For best results, it is recommended to print with a 0.2 mm nozzle to achieve clean edges and finer surface detail.
- Supports are required for certain overhangs and internal sections. Depending on your specific printer, slicer profile, and filament choice, support settings may need to be adjusted manually to ensure optimal stability and clean removal.
After printing, post-processing is necessary. Carefully remove supports using side cutters, and refine edges or contact points with a file to achieve a clean and polished finish.
Take your time with setup and finishing for the best possible result.
Enjoy printing!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)