Porche 911 - Free 3D Print Model

Search models, users, collections, and posts

R Rijkaart

Hobby & DIY>Vehicles

IP Report

This model is created by Image to 3D

Make Your Model

Print Profile(1)

All

P1S

H2C

P2S

H2S

X1E

A1 mini

H2D

X1 Carbon

P1P

H2D Pro

X2D

A2L

0.12mm layer, 2 walls, 10% infill

Designer

2.1 h

1 plate

4.4(10)

Open in Bambu Studio

Boost

139

264

148

Released

Description

Porsche GT3 RS – Compact High-Detail 3D Print Model

This compact Porsche GT3 RS model is designed for clean, high-quality 3D printing with a strong focus on detail and overall proportions. With a total length of approximately 8 cm, it’s perfect as a desk display piece, shelf decoration, or collector’s mini model.

The design is optimized for single-color PLA printing, allowing you to choose any filament color you prefer. No multicolor setup required — simple, efficient, and reliable on most FDM printers.

Print & Handling Notes

Material: PLA
Single-color print
Supports required
When removing supports, handle the rear wing/spoiler with care, as this is a delicate and finely detailed part of the model.

This model is intended for users who appreciate clean geometry, realistic styling, and a smooth printing experience. Minor print settings can be adjusted directly in Bambu Studio to suit your printer, while the original design remains intact.

(makerworld.com/makerlab/imageTo3d)

Comment & Rating (12)

@Gmodaniel

Print Profile

0.12mm layer, 2 walls, 10% infill

it looks nice you just have to be careful when removing the supports because I made a mistake and lost the spoiler

Show original

@user_1959458347

Print Profile

0.12mm layer, 2 walls, 10% infill

Strength Issue:Tried printing twice, but it always gave me the same problem at the base

Show original

@H3nryTh3L3g3nd

This is clearly not the model’s fault, likely due to bed adhesion problems

@RandoDaaRuler

Print Profile

0.12mm layer, 2 walls, 10% infill

came out great but supports broke wing :(

@ChippyMK1

really cool

@mackk10

Print Profile

0.12mm layer, 2 walls, 10% infill

fits very well and looks great on the stand

(Edited)

@user_4247960333

Print Profile

0.12mm layer, 2 walls, 10% infill

@user_1630342705

Print Profile

0.12mm layer, 2 walls, 10% infill

@user_1392678204

Print Profile

0.12mm layer, 2 walls, 10% infill

@user_2396945313

Print Profile

0.12mm layer, 2 walls, 10% infill

@user_2469085760

Print Profile

0.12mm layer, 2 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.