Elf in the Sun Hueforge - Free 3D Print Model

Search models, users, collections, and posts

Advancedtechworldwide

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(2)

All

H2C

P2S

H2S

H2D

H2D Pro

X2D

A2L

P1S

X1E

P1P

X1 Carbon

0.08mm layer, 2 walls, 100% infill

Designer

6.1 h

1 plate

0.08mm layer, 2 walls, 100% infill

Designer

6 h

1 plate

Open in Bambu Studio

Boost

Released

Description

This is my latest print please let me know if there anything I can improve.

Project: Sun Elf_red_yellow.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.77x200mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

    #000000 PLA Sunlu Meta Black Transmission Distance: 1
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
    #ffffff PLA Sunlu Meta White Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #21 (1.76mm) swap to Red
    At layer #24 (2mm) swap to Yellow
    At layer #36 (2.96mm) swap to White for the rest.