iPhone SE 3/2 g 8/7 TPU AMS don't touch my iphone

Before you start reading, if you are satisfied with my project, remember to leave a nice like and give 5 stars ⭐⭐⭐⭐⭐ to the print profile, you will help me continue. Thank you very much!

!! ATTENTION !!

I've been told that sometimes prints, with Textured PEI plate, tend to stick too much. It's true!

I've printed many to test, and I've learned a few little tricks: besides letting the plate cool down properly, I don't clean it before printing; in fact, I dirty it with my hands - the normal grease we have on our hands limits the adhesion of the cover to the plate - then I use the https://makerworld.com/en/models/88371-bambu-lab-bed-scraper#profileId-1524370) or this one which is lower https://makerworld.com/en/models/12703-bambu-bed-scraper#profileId-12705.
The engineering plate is more suitable for use with TPU, but it doesn't come with the texture effect.

I've also achieved better results by lowering the plate temperature. TPU still sticks anyway.
Let me know in the comments if it works well.
Good work.

Here's a fun cover made with TPU for Bambu Lab AMS. I haven't found any others available.
The filament is quite rigid, and solutions with classic TPU don't work well because you can't insert the phone.
Projects with rigid filaments have shapes that cover the phone poorly, leaving areas exposed, to allow it to be inserted.
Then it falls, hits exactly that exposed spot, and breaks!
So I designed a project compatible with TPU for AMS, also to take advantage of the beautiful potential of multi-color prints.
After several hours of design and as many tests, to also make the button maneuverability available, I created the solution you see.
Furthermore, I've also provided an adequate hole for thick Lightning connectors. The previous cover I bought had a hole that was too small and it was a problem.
I haven't tried it with PLA, if you try it please share it in the comments.
I have provided minimal and easily detachable supports for a better print. But it can also be done without them.
The project is optimized to consume less filament, I didn't include a prime tower because I didn't need it
If you're interested, put "follow" on my profile and you'll be notified of my new projects.
If you liked the project, leave a nice like, it will help me continue.
Let me know what you think in the comments and attach photos, you'll help other users and earn MakerWorld points.
Remember to also check out my other projects, you might find something useful.
Happy printing everyone!