fyi, your HSW plates are mounted back to front, the thicker part goes at the front, the thinner part goes against the wall. It is so the mounts can properly ‘click’ into the HSW holes.

c4444

Love them, scaled them up to 110%, and they fit great.I added my print profile too.

CB 3D Print

0.2mm layer, 2 walls, 15% infill

RobotDecoy21

I scaled them up because at normal size they are loose inside of the insert, but at %110 scale, they fit perfectly flush and are held in by pressure fit.

John, in your picture, your wall is backwards. the thinner side goes against the wall so the clips go in easier and can luck in place.

Maker

Love this! works great! 4th pic is the end result of my project. Thanks for sharing your work!

ShadowsNdust457

Fits Snugly 110%

Fynn

I made a 110% scale print profile and they fit great!

Yoooooo

changed it to be able to add a 12mm magnet for screw less mounting

McMahanclan

as expected, using with spray paint mount 

patrickbryant1996

RiskoPipisko

fits great, ya got to push them in but perfect for what im looking for, will print this file again 

Ol Ben

John

cover

plate_1.png

JJTechPrints

PXL_20240316_144714067_c34ebfe6-6d38-4e1f-8064-7360da34f75c.webp

plate_1.webp

PXL_20240316_144611680_533814ad-98ec-4b89-853d-de412efa045b.webp

<p>A1 Mini print profile.  Reminder that this is an insert and will not fit into a honeycomb wall on its own. This insert does fit into the parts that accept an inserts in <a target="_blank" href="https://makerworld.com/en/models/93561#profileId-118642" rel="nofollow noopener">this honeycomb accessory set for the A1 Mini</a> by <a target="_blank" href="https://makerworld.com/en/@adh2013" rel="nofollow noopener">@adh2013</a> </p>

IMG_4307.jpeg

<p>This is meant to slip into the parts that join the HSW panels together and works with just about any screw.</p>

Print Profile(2)

Description

Comment & Rating (182)

License

Related Models

HSW Screw Insert

Print Profile(2)

Description

Comment & Rating (182)

License

Related Models