Print Profile(1)
Bill of Materials
Description
This dart is an approximately 1-meter-tall replica of a Luke Littler dart
The dart is printed in separate pieces and then assembled and screwed together. Nevertheless, I recommend fixing some parts with glue
Don't worry about assembly, the parts have printed numbers to prevent confusion
For the flight, glue is definitely required, as a two-part print is necessary for the desired look
Assembly instructions are attached
Notes
I strongly recommend using the uploaded print profile and not changing the layer heights. Otherwise, I expect the result will not be correct
The arrow lines on the flights will only be visible with the preset layer height. Also, the screw connections might not function correctly if the layer height is changed
Print plates 7 and 8 must be printed twice each
I hope you like my model, then feel free to leave a boost and a rating.
Boost Me (for free)
If you like the model, feel free to leave a boost. It's completely free for you! For me, however, it makes a huge difference and helps me continue to develop models for you.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)