MONOCORE Bullpup
Print Profile(1)
Description
MONOCORE Bullpup
Uses the Backdraft Innovations Phoenix engine V2
https://backdraftinnovations.com/products/backdraft-phoenix-m4-hpa-engine-fcu
retains all controls from an M4 platform, working selector and push button mag release
Things you will need to complete this project
38mm OD 35mm ID Alu Tube ( I wrapped mine in carbon fiber vinyl) https://www.amazon.com/dp/B0B5MHX3ZF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
M3 hardware (i used mostly m3x10 but will need a few 25's)
M3 heat set inserts
M3 hex nuts
One pen spring for mag release that will fit over a M3
One M3x35 pin to stiffen the mag catch (you can try a printed version but it has not been tested )
AEG Safety Lever for M4
Trigger for V2 gear boxes
Hop chamber ( modeled with a ZCI https://brillarmory.com/products/zci-rotary-complete-hop-up-chamber?_pos=1&_psq=zci&_ss=e&_v=1.0 )
340mm Barrel or cut down the Alu tube to run any size you'd like https://brillarmory.com/products/zci-340mm-6-02-stainless-steel-barrel
The build is quite straight forward once all parts are printed
If you have any questions please leave a comment and i will answer to the best of my ability
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)