Starship V3 (1:100)
Print Profile(3)
Description
Boost Me (for free)
Thanks for your boost
Starship V3
Update19.04.2026
Model design has been revised
This is an improved 1:100 scale model of the Starship V3 from Space-X
It is a very detailed model including tiles, and therefore also a large file
Print time for all parts approximately 24 hours
Material used : Bambu PLA Basic Black
Bambu PLA Silk+ Silver
Assembly:
Print all parts and assemble them
Before gluing, test if everything fits and in what order the parts should be arranged
It is best to start with the fuselage
Then slide in the engine units from below
Now you can assemble the nose cone and connect it to the fuselage, then attach the previously glued flaps
To secure the upper flaps, a piece of filament approximately 70 mm long is inserted into the hinge holes and the excess end is cut off
The lower flaps are inserted upwards and secured at the bottom with short M2 cylinder screws
Matching Booster:
Matching Launch Pad:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (137)