FUTABA (Persona 5)

Project: futaba.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 124.54x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic  Dark Blue Transmission Distance: 0.3
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Matte Latte Brown Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 5 unique filaments

Swap Instructions:
    Start with Dark Blue
    At layer #9 (0.8mm) swap to Orange
    At layer #16 (1.36mm) swap to Latte Brown
    At layer #20 (1.68mm) swap to Yellow
    At layer #23 (1.92mm) swap to Beige for the rest.