Fidget Ring Ultra Fast / Spin Edition
Print Profile(11)
Description
The **fidget ring** is a finely tuned, rotatable ring system for relaxed hands, focus, and playful distraction
It consists of two interlocking rings that are precisely printed and perfectly matched
AMS is only relevant for the DualColor_Print_Profil: Print by Object→ Only one Color change needed :)
The fidget ring has a standard **inner diameter of 18 mm**
For other sizes, you can simply scale the model uniformly:
- 15 mm → 83.3 %
- 16 mm → 88.9 %
- 17 mm → 94.4 %
- 19 mm → 105.6 %
- 20 mm → 111.1 %
- 21 mm → 116.7 %
- 22 mm → 122.2 %
⚠️ **Important:** The tolerances are very fine. An accurately calibrated printer (flow rate, Z-offset, extrusion) is crucial for the parts to rotate freely after printing.
Choose your favorite colors and combine what you like
The cage and the ring are printed separately. Then press them into each other with a lot of pressure: Note, the cage will not break in the process, I have printed many in PLA and it has always worked. So you don't need to worry
!!!! The inner ring has a side intended for pressing in, pay attention to this when placing both rings on top of each other !!!!
Top / Last Layer → Use this side for pressing in
Bottom / First Layer → Not suitable for pressing in
Assembly:
Boost Me (for free)
As a student, I put a lot of heart and time into my designs – with your boost, I can implement more projects and try out new ideas
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (564)