Stone Cold Steve Austin 3:16 Beer WWE Hueforge
Print Profile(3)
Description
Stone Cold Steve Austin 3:16 Hueforge
I hope you like it Subscribe to me so you don't miss any new uploads
In the print profile, select the desired size. I have created profiles for 200x200, 150x150, and 100x100 mm
You can also scale the model along the X and Y axes as desired. The Z-axis must NOT be changed
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Ash Gray
At layer #21 (1.76mm) swap to Ivory White for the rest
Boost Me (for free)
If you like my creation, please support me with a small boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)