Prop Cane(100th day of school)

I designed this cane for my daughter's 100th day of school celebration old lady costume. The photos show her initials, but the included file just says 100th day of school on the handle. You can change the text to whatever you want, or remove it, in bambu studio. 

The cane prints in two parts, I sized them to be 256mm tall so it just fits on the p1/p2/a1 sized printers. Total length of the cane comes in at just under 500mm when you connect the two halves. The connection is reinforced with higher infill and rounded slightly to prevent a weak spot, since my original design actually broke at the joint. You can scale the pieces larger in the z direction if you'd like a simple way of lengthening the cane for h series printers. You could probably do a cut and add a cylinder as well if you'd like to preserve the other proportions. 

Just press the halves together and you're done. You could glue them if you want an extra secure hold. I printed this in matte brown since it was all I had, but pla basic brown would be better for more strength at the connection point.