Print Profile(2)
Description
Feel free to leave a comment or a boost if you like the print
Boost Me (for free)
Your boost helps me create even more models! Thank you for your support 🙏✨
Instructions
You can resize, but be careful not to change the Z-axis.
Print with 100% infill and a 0.08 mm layer height, with a 0.16mm base layer.
The model measures 200 × 200mm.
You can print with higher layer heights below the 0.4mm base thickness.
The maximum allowed thickness is 2.64mm and the actual thickness is 2.4mm.
Filaments used:
- #000000 – Bambulab PLA Basic Black Transmission distance: 0.6
- #c00d1e – Bambulab PLA Basic Red Transmission distance: 4
- #fce300 – Bambulab PLA Basic Yellow Transmission distance: 6
- #ffffff – Bambulab PLA Basic Jade White Transmission distance: 5
This print uses 4 different filaments.
Filament change instructions:
- Start with Bambulab PLA Basic Black
- At layer #8 (0.72 mm), change to Bambulab PLA Basic Red
- At layer #15 (1.28 mm), change to Bambulab PLA Basic Yellow
- At layer #23 (1.92 mm), change to Bambulab PLA Basic Jade White for the rest of the print
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)