Red Bull LED Sign – Fan Art for Bambu Lab MH001

Red Bull LED Sign – Fan Art for Bambu Lab MH001

This multi-part Red Bull fan-art sign is designed as an eye-catching display piece and is fully compatible with the Bambu Lab LED Lamp Kit MH001. It is purely decorative and not affiliated with or endorsed by the Red Bull brand.

Model overview

The sign is built from several separate parts to make multi-color printing and assembly easy:

• Main base – A dark body that holds all elements and hides the LED wiring from the MH001 kit.
• Red “Red Bull” letters – Printed as individual pieces and pushed into the recesses on the front of the base for a clean, dimensional logo look.
• Two charging bulls – Mirrored, highly detailed models that sit on top of the base. They are designed to be printed separately in a bright red filament and then glued into the locating pockets.
• Yellow sun / disc – A circular panel behind the bulls that acts as a light diffuser for the LED. Concentric surface rings enhance the glowing effect when lit.

The finished print works great as a shelf or bar decoration, a workshop sign, or a mood light in a gaming room.

LED integration (Bambu Lab LED Lamp Kit MH001)

The model is prepared to use the Bambu Lab LED Lamp Kit MH001:

• The LED module from the MH001 kit is mounted behind or inside the yellow disc.
• When switched on, the module creates a bright, warm halo between the two bulls, closely mimicking the illuminated look of the original logo.
• The base provides room to hide cables and the controller, so from the front you only see the glowing disc and the logo.

No electronics are included in the STL files – you will need the original Bambu Lab MH001 kit.

Printing recommendations

• Colors:
  • Base: dark blue / dark grey
  • Letters: opaque red
  • Bulls: bright red
  • Disc: yellow or translucent yellow for maximum glow
• Supports:
  • Recommended for the bulls (especially under bellies, tails, and horns).
  • The base and letters generally print without support.
• Infill & settings:
  • 10–20% infill is usually enough for the base and letters.
  • Higher infill or more perimeters on the bulls will make them more solid and resistant to handling.
• Assembly:
  • Dry-fit all parts first.
  • Glue the letters into the base, then the bulls into their slots.
  • Mount the LED module from the MH001 kit and finally install the yellow disc as the diffuser.

Notes

• This is fan art for private use and display only.
• No commercial use or official branding is implied.