Straw Dispenser

Tired of straws exploding out of your drawer like chaotic confetti every time you open it?

Meet your new best friend: Straw Dispenser!

No more random straw avalanches. No more “where the heck are all my straws?!” moments.

Just pop this dispenser on your home bar, kitchen counter, coffee station, home bar, or shelf!
 

Clear-PETG disclaimer:

• I've not yet found the perfect settings for printing really nice see-through / transparent walls that look great.
• If you're printing with clear PETG, I strongly recommend doing some test prints first to dial in your settings — transparency can be tricky!
• If you manage to get beautiful, clear see-through results, please share your print profile here, if you want to! :)

Straw size:

• This dispenser is designed specifically for straight straws measuring 210 mm (21 cm / approximately 8.25 inches) in length.
• This length represents the widely accepted universal standard for many straight drinking straws, commonly used for beverages such as milkshakes, iced drinks, bubble tea, and smoothies.
• I have personally NOT tested the straws that bend.
   

Assembly instructions:

1. Connect the guide rail and the base. Recommended to use just a tiny dab of super glue here..! Not needed.

   

   
   
    

2. Place the ‘elevator’ on the assembly. DO NOT USE GLUE 

   

   
    

3. Place the ‘Outer Wall’ on the assembly. Be carefull if you're using glue here. Glue is not recommended for this step.

4. 

   Place the lid on the outer wall. DO NOT USE GLUE.

5. 

    Place the handle on the top, this requires a bit of force until your hear a ‘click’-sound. Use super-glue for a stronger fit..!

You're done! Enjoy!