Search models, users, collections, and posts

Seachem Safe Measuring Spoon 10 Gallon Dose

Print Profile(1)

All
P1P
A1 mini
X1E
A1
H2S
X1
P2S
H2C
X1 Carbon
H2D
H2D Pro
P1S
X2D
A2L

0.2mm layer, 3 walls, 10% infill
0.2mm layer, 3 walls, 10% infill
Designer
11 min
1 plate

Open in Bambu Studio
Boost
1
5
0
0
4
4
Released 

Description

Seachem Safe Measuring Spoon – 10 Gallon Dose (Approx. 1/120 tsp) – 10 Minute Print

This precision measuring spoon is designed specifically for dosing Seachem Safe powder. The scoop is calibrated to approximately 1/120 teaspoon, which corresponds to the recommended dose for treating approximately 10 gallons of aquarium water, based on Seachem’s official dosing instructions.

Seachem Safe is extremely concentrated, and measuring such small quantities accurately can be difficult using pinches or improvised tools. This spoon provides a consistent and repeatable way to dose small volumes safely and conveniently.

The model is highly efficient and prints in approximately 10 minutes, making it quick and easy to produce.

Dosing reference (based on Seachem Safe instructions)

Seachem Safe instructions state:

1/4 teaspoon treats 300 gallons

Which corresponds to:

  • 1 teaspoon treats 1200 gallons
  • Approximately 1/120 teaspoon treats 10 gallons

This scoop is designed to provide a practical micro-dose suitable for treating approximately 10 gallons per level scoop.

Actual delivered volume may vary slightly depending on printer calibration, filament, and print settings.

Features

  • Designed for dosing Seachem Safe powder
  • Suitable for treating approximately 10 gallons per level scoop
  • Prints in approximately 10 minutes
  • Shallow cavity improves fill consistency and leveling
  • Flat rim allows precise leveling
  • Compact and durable
  • Designed specifically for aquarium hobbyists

Use cases

  • Dosing Seachem Safe during water changes
  • Fishless cycling
  • Treating bucket water before adding to aquariums
  • Dedicated aquarium dosing tool

Technical specifications

  • Equivalent to approximately 1/120 teaspoon
  • Treats approximately 10 gallons (Seachem Safe)
  • Print time: ~10 minutes
  • Supports required: None
  • Print orientation: Bowl facing upward

Recommended print settings

  • Layer height: 0.2 mm
  • Walls: 3+
  • Infill: 10–20%
  • Infill pattern: Gyroid
  • Material: PLA
  • Supports: None required

Important note

This spoon is intended specifically for Seachem Safe powder, not Seachem Prime liquid.

Always use a level scoop for consistent dosing.

Comment & Rating (0)

(0/1000)