Sturdy Marking Template for Lockwood 3770
Print Profile(1)
Description
Sturdy Hinged Marking Template for Lockwood 3770 Series Mortice Lock
A sturdy marking stencil for the installation of the Lockwood 3770 series mortice lock and furniture.
Hinged edge stop allows the stencil to quickly be aligned to 60mm backset on either side of the door and then packed flat in the toolbox.
NOTE: The printed hinge pin may require a little care when feeding in.
Measurements taken from the following paper template which should be used for reference: https://www.lockweb.com.au/au/en/documents/technical-downloads/mortice-locks/selector-series-commercial-mortice-locks/3772/3770%20Series%20Timber%20Mounting%20Template%20-%204770-5121.pdf
Ensure only holes required by handing, function and furniture are used.
Printing Suggestions:
Print with PETG if it's going to be left in a hot van all day.
No supports or brim required, just a nice clean build plate.
Lockwood 3782 version:
https://makerworld.com/en/models/2498621-sturdy-marking-template-for-lockwood-3782
Boost Me (for free)
If you found this useful, please consider giving me a boost
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (2)