King from Tekken - HueForge

Project: king final.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 193.01x195.78mm in size

You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.8mm

Filaments Used:  (* = Owned)
    #c00d1e * PLA BambuLab Basic Red  Transmission Distance: 4.2
    #ffffff * PLA BambuLab Matte Ivory White  Transmission Distance: 3.6
    #000000 * PLA BambuLab Matte Charcoal  Transmission Distance: 0.1
    #5e43b7 * PLA BambuLab Purple  Transmission Distance: 1.7
    #777b78 * PLA Sunlu Meta Grey  Transmission Distance: 2.1
    #0086d6 * PLA BambuLab Basic Cyan  Transmission Distance: 2
    #4c5f71 * PLA BambuLab Basic Blue Gray  Transmission Distance: 1.5
This print uses 7 unique filaments

Swap Instructions:
    Start with Red
    At layer #8 (0.48mm) swap to Ivory White
    At layer #17 (0.84mm) swap to Charcoal
    At layer #21 (1mm) swap to Purple
    At layer #23 (1.08mm) swap to Grey
    At layer #29 (1.32mm) swap to Cyan
    At layer #32 (1.44mm) swap to Blue Gray for the rest.