Xbox ABXY Buttons For Playstaion 4 DS4 Controller

Long story short, Xbox buttons for a PS4 DS4 controller!

Long story long, getting my daughter involved in PC gaming but some games will only show Xbox buttons with the DS4 controller, while gamers familiar with both systems will probably have no problem mashing away without looking, she's new to gaming and needs to see them for now, so I made some new buttons with the Xbox symbols.

The print profile I used is the Single Colour version because I don't have AMS yet and didn't fancy doing all the filament changes manually, although I've made profiles for two colours; button colour and different symbol colour, full colour; one button colour and 4 different symbol colours, and full colour across two plates; same as full colour but using two plates with 3 colours on each, button colour and 2 symbol colours per plate for if your setup doesn't support 5 colours, for some reason I can't upload these just yet but I'll get them uploaded as soon as possible.

All print profiles have variable layer height, 0.2mm for the bulk of the print, down to 0.08 for the top layers to get a smoother finish on the curve for the top of the button, seams are also placed at the back of the buttons and support disabled for some of the internal features, support is needed because the inside of the button is raised from the bed, if you don't disable support from the upper layers it may be difficult to remove but as long as the internal face of the button is clean it won't matter if you don't remove the rest.