Dotty Double Scotty mount
Print Profile(1)
Description
This is a base for (2) scotty rod holders. This is designed to replace the down tube/rod holder in a kayak. This one is designed specifically for the old town sportsman autopilot 136. Will fit many kayak models with the town tube that uses the same screw pattern.
Simple take the (3) screws out of the down tube and replace with this part. I do recommend adding some neoprene between the (2) to seal off at the hole in the boat. The model will print with a support for the inside post, you will need to remove that support, a flat head screw driver works well.
(1) of the models has a hole, I designed this for my humminbird transducer cable to fish through. I have a custom transducer mount on the back and feed the wire through this hole to the hull of the boat.
Let me know if this works for your condition, if so share some pictures!
Boost Me (for free)
Thanks for looking at my rod holder! I hope you found it at least interesting. I spent a lot of design time on this model, a boost would go a long way.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)