Launchpad pro mk3 decksaver/cover

This is a five-piece (160 g) deck saver for the novation launchpad pro mk3 (suitable for small printers like the A1). 

Four identical pieces are connected with a snap-fit holder. Each piece is quite easy to print, and the assembly is easy.

All ports (midi ports and the USB port) are still usable and you can leave the USB cable connected.

The cover is designed as thin as possible, so you can still throw your launchpad in a bag and carry it around with the cover. I printed with 5% infill without any rigidity problem.

DISCLAIMER:

The launchpad pro is rather large and as a result, if your printer is not well-calibrated, there maybe be small gaps between sections after assembly (printing with ASA might also result in the same issue due to shrinkage). You can apply some electrical tape under the gaps to make sure no dust can get it.

Lastly, the model does not have any textures, so your print might look different from the photos.